Filter Sort
close

12.80, 8.00, 0.25, 2.20, 7.97, 8.20 - Manufactured Housing

7 items
1 - 7 of 7
DEEP SET - CAP ANCHOR/STABILIZERS J 36 in. long with 3/4 in. rod and 4 in. & 6 in. helix with 7 in. Class 4A

DEEP SET - CAP ANCHOR/STABILIZERS J 36 in. long with 3/4 in. rod and 4 in. & 6 in. helix with 7 in. Class 4A

59092

Available in a sleek black paint finish or the specialized galvanized option (via special order), Tie Down's Deep Set Anchors combine stabilization and anchoring in one design, resisting lateral movement through the soil. With a one-year warranty, Deep Set Cap Anchors eliminate the need for a separate stabilizer plate, streamlining the installation process and saving you valuable time. The utilization of a soil torque probe to classify the soil is required for installation. The I and J versions boast premium 7-inch lengths with specialized teeth for enhanced soil penetration, ensuring superior strength and performance. The K and L variants offer 6-inch options, providing an economical yet reliable choice for your stabilization needs. From premium to economy, Tie Down's Deep Set - Cap Anchors/Stabilizers offer a dependable range of solutions tailored to your specific requirements. These anchors are tested to meet the stringent requirements of HUD 3280 and 3285, and listed and labeled by RADCO #1349, ensuring compliance with industry standards and regulations.
View Details
500 lb. Holding Power All Purpose Light Duty Anchor Kit

500 lb. Holding Power All Purpose Light Duty Anchor Kit

59070

Tie Down’s versatile All Purpose Light Duty Anchor Kit is specifically designed for light-duty use, making it perfect for tasks that require up to 500 lbs. of ultimate holding power on each anchor. The kit includes four 15 in. painted anchors, each boasting an impressive 500 lbs. ultimate holding power. These anchors are strategically placed on corners, providing stability and security. The inclusion of eight 1/8 in. galvanized clamps further reinforces the setup, ensuring a robust and dependable connection. To further enhance its utility, the kit offers 50 ft. of 1/8 in. galvanized aircraft cable. This versatile cable can be cut to the desired length, allowing you to connect anchors together or use them individually. The cable’s galvanized construction ensures durability and resistance to corrosion, ensuring its reliability over time.
View Details
4 in. x 6 in. x 1 in. PADS AND PIERS ABS SHIMS/WEDGES

4 in. x 6 in. x 1 in. PADS AND PIERS ABS SHIMS/WEDGES

59663

Tie Down's ABS Shims/Wedges, measuring 4 in. x 6 in. x 1 in., are expertly crafted to deliver impeccable support and alignment in pier structures. These shims excel in filling gaps and securing piers between the pier plate and main beam, ensuring a solid and level foundation for your structure. Precision is paramount. Whether it's leveling your home or bridging gaps between the base of the main beam and the top of the pier cap, our ABS Shims/Wedges deliver the perfect solution. Installation is straightforward and hassle-free. Following the placement of an 8" x 8" x 16" concrete block atop pier footings, determine the gap size between the pier and beam. This measurement dictates the number and size of shims required (minimum of 2 inches), maintaining a clearance of less than 1 inch between pier top and beam bottom. Our shims can be double-stacked—2 inches on 2 inches or 1 inch on 2 inches—to adapt precisely to your needs. For double pier plate stacks, conveniently position two cap plates side by side. ABS Shims/Wedges must be used in pairs, ensuring a reliable and uniform support system for your pier structure. Fully approved for use by HUD 3285.312(3), attesting to their superior quality and adherence to industry standards, our ABS Shims/Wedges are thoughtfully crafted from recycled ABS materials, aligning with environmentally friendly construction choices.
View Details
STEEL PIER SET for XI2 ASPHALT SYSTEMS

STEEL PIER SET for XI2 ASPHALT SYSTEMS

59616

Xi2 Asphalt Foundation System for Manufactured Adjustable Steel Piers
View Details
Perimeter I beam Frame Kit

Perimeter I beam Frame Kit

59617

Xi2 Asphalt System Hardware Kit for Perimeter I beam Frame
View Details
26 in. Steel Braced Support Piers, 6000 lb. Capacity

26 in. Steel Braced Support Piers, 6000 lb. Capacity

MPP26

A reliable and efficient alternative to traditional dry-stacked blocks, our Steel Support Piers are designed and engineered to handle vertical loads with ease, providing a support rating of up to 6,000 lbs. These Support Piers are versatile in application, suitable for a wide range of factory-built structures including manufactured homes, mobile commercial units, classrooms, multiplexes, sheds, and similar structures. With the ability to withstand various wind zone conditions, except for “Exposure D” or areas within 1,500 ft. of the coastline, our Steel Support Piers are designed to provide exceptional stability and support. Available up to a maximum of 30 in. and in braced support as well, these Support Piers are compatible with a variety of heads to prevent movement after attachment to the beam or marriage line.
View Details
14 ft. FRAME TIE WITH HOOK (MHT14)

14 ft. FRAME TIE WITH HOOK (MHT14)

59214

Tie Down's Frame Tie with Hook offers a quick and secure solution for installing frame ties with ease. Crafted from heavy-duty 1/4 inch steel, the robust hook ensures a strong and reliable connection to the frame, guaranteeing the safety and stability of your structure. This frame tie is constructed with certified galvanized steel strapping, adhering to the stringent NCS BCS A225.1 (ANSI A119.3) and HUD specifications. The galvanized coating provides excellent protection against corrosion, making it suitable for various environmental conditions. Choose from multiple options to suit your needs, available in boxes of 30 or 50 as well as 8 per bundle. The frame ties are offered in various lengths, ranging from 6 feet to 16 feet, allowing you to select the perfect fit for your project.
View Details
1 - 7 of 7
1