close
Filter By
Brand
Color
Country of Origin
Division
Gross Weight (lbs.)
- 0.05 1
- 0.10 1
- 0.16 1
- 0.25 1
- 0.35 1
- 0.50 1
- 0.59 1
- 0.60 1
- 0.67 2
- 0.71 1
- 0.75 3
- 0.97 1
- 1.00 5
- 1.10 1
- 1.15 1
- 1.24 1
- 1.30 1
- 1.34 2
- 1.42 3
- 1.48 2
- 1.50 1
- 1.58 3
- 1.59 1
- 1.60 1
- 1.62 2
- 1.67 2
- 1.70 2
- 1.71 1
- 1.75 2
- 1.76 1
- 1.77 1
- 1.83 1
- 1.85 1
- 1.93 2
- 1.94 1
- 10.00 1
- 10.50 1
- 11.00 1
- 11.50 1
- 12.00 2
- 12.19 1
- 12.80 1
- 13.25 1
- 18.00 1
- 19.00 1
- 2.00 2
- 2.05 1
- 2.10 2
- 2.20 1
- 2.25 1
- 2.32 1
- 2.50 1
- 2.53 1
- 2.80 2
- 22.00 1
- 3.00 1
- 3.08 1
- 3.10 1
- 3.15 1
- 3.48 1
- 3.50 2
- 3.75 1
- 3.80 1
- 3.85 1
- 3.98 1
- 37.00 1
- 4.00 1
- 4.02 1
- 4.50 2
- 4.60 1
- 4.73 1
- 5.00 2
- 5.13 1
- 5.20 1
- 5.30 1
- 5.60 1
- 5.67 1
- 5.94 1
- 56.00 1
- 6.00 1
- 6.03 1
- 6.25 1
- 6.34 1
- 6.50 7
- 7.00 4
- 7.44 1
- 7.50 2
- 7.67 1
- 7.97 1
- 8.00 2
- 8.17 1
- 8.20 1
- 8.67 1
- 8.80 1
- 9.00 2
- 9.50 1
- 9.67 1
- 90.00 1
- 95.00 1
Height (in.)
Warranty
Width (in.)
12.80, 0.25, 10.00, 8.20, 1.34, 1.10, 1.50, 1.76 - Manufactured Housing
9 items
DEEP SET - CAP ANCHOR/STABILIZERS J 36 in. long with 3/4 in. rod and 4 in. & 6 in. helix with 7 in. Class 4A
59092
Available in a sleek black paint finish or the specialized galvanized option (via special order), Tie Down's Deep Set Anchors combine stabilization and anchoring in one design, resisting lateral movement through the soil. With a one-year warranty, Deep Set Cap Anchors eliminate the need for a separate stabilizer plate, streamlining the installation process and saving you valuable time. The utilization of a soil torque probe to classify the soil is required for installation. The I and J versions boast premium 7-inch lengths with specialized teeth for enhanced soil penetration, ensuring superior strength and performance. The K and L variants offer 6-inch options, providing an economical yet reliable choice for your stabilization needs. From premium to economy, Tie Down's Deep Set - Cap Anchors/Stabilizers offer a dependable range of solutions tailored to your specific requirements. These anchors are tested to meet the stringent requirements of HUD 3280 and 3285, and listed and labeled by RADCO #1349, ensuring compliance with industry standards and regulations.
- USD
7 ft. Frame Tie with Buckle, 50 per box
59141
Tie Down's Frame Tie with Buckle includes a galvanized strap pre-attached with a durable buckle, ensuring a secure and hassle-free connection to the frame. The process is straightforward: effortlessly push the strap's end between the inside of the frame "I" beam and the floor. Position the buckle at the upper end of the "I" beam frame, then wrap the strap around the beam and thread its end through the slot in the buckle. A simple pull secures the strap, keeping the buckle in place for added stability. Choose the perfect length for your project with options ranging from 7 to 16 ft. Available in convenient quantities, you can opt for boxes containing 30 or 50 kits or bundles of 8 kits each. With Tie Down's Frame Tie with Buckle, you're equipped with a smart solution that streamlines installation, saving you time and effort while ensuring a dependable connection to the frame.
- USD
5 ft. Universal Swivel Strap Connector, 50 per box
59207
Tie Down's Universal Swivel Strap Connector empowers you to achieve secure bolted swivel or slotted clip attachments by seamlessly connecting straps to beam clamps and uplift brackets. Crafted for excellence, these connectors are made with G-120 strap material, ensuring exceptional strength and durability. Offering a comprehensive range of installation options, you have the flexibility to choose between swivel strap and I-beam bracket connections, sidewall slotted configurations, sidewall setups with nut and bolt fasteners, and longitudinal I-beam installations. Engineered to meet the demands of wind zones 2 and 3, Tie Down's Universal Swivel Strap Connector excels in challenging conditions, ensuring reliable performance in diverse construction environments. Each package includes one high-quality strap and is available in quantities of 30 or 50 per box or 8 per bundle of connectors.
- USD
2 in. x 8 in. x 16 in. ABS PIER PLATES/CAP BOARDS
59662
Meant for bridging the vertical gap between the top of a pier and the bottom of the main beam, Tie Down's ABS Pier Cap Plates can be utilized individually or in a double-stacked configuration. With a remarkable load capacity of 8,000 lbs. for single use and an impressive 16,000 lbs. for double application, t1 in. plates are designed to complement 2 in. counterparts.
- USD
4 in. x 6 in. x 1 in. PADS AND PIERS ABS SHIMS/WEDGES
59663
Tie Down's ABS Shims/Wedges, measuring 4 in. x 6 in. x 1 in., are expertly crafted to deliver impeccable support and alignment in pier structures. These shims excel in filling gaps and securing piers between the pier plate and main beam, ensuring a solid and level foundation for your structure. Precision is paramount. Whether it's leveling your home or bridging gaps between the base of the main beam and the top of the pier cap, our ABS Shims/Wedges deliver the perfect solution. Installation is straightforward and hassle-free. Following the placement of an 8" x 8" x 16" concrete block atop pier footings, determine the gap size between the pier and beam. This measurement dictates the number and size of shims required (minimum of 2 inches), maintaining a clearance of less than 1 inch between pier top and beam bottom. Our shims can be double-stacked—2 inches on 2 inches or 1 inch on 2 inches—to adapt precisely to your needs. For double pier plate stacks, conveniently position two cap plates side by side. ABS Shims/Wedges must be used in pairs, ensuring a reliable and uniform support system for your pier structure. Fully approved for use by HUD 3285.312(3), attesting to their superior quality and adherence to industry standards, our ABS Shims/Wedges are thoughtfully crafted from recycled ABS materials, aligning with environmentally friendly construction choices.
- USD
5 ft. G-60 Strap with Swivel Connectors, 50 per box
59725
Tie Down's Strap with Swivel Head Bracket Swivel Connectors introduces a versatile solution for secure and reliable connections in various construction applications. This innovative system facilitates bolted swivel attachments, enabling seamless connection between straps, beam clamps, and uplift brackets. Choose between two options: the G-60 and G-120 straps, each tailored to specific wind zones and environmental demands. G-60 straps are engineered for wind zones 1 and 2 while the G-120 straps excel in wind zone 3 and are a recommended choice for coastal regions, especially Florida. The galvanization thickness differentiates these options – G-60 boasts double the thickness of G-30, ensuring exceptional durability, while G-120 quadruples the thickness to provide unparalleled resilience against the elements, specifically in areas prone to corrosion. Whether you're working on residential, commercial, or industrial projects, Tie Down's Strap with Swivel Head Bracket Swivel Connectors offers the versatility and strength needed for dependable connections. These connectors come conveniently packaged in quantities of 30 or 50 per box, making them a practical choice for both small and large-scale endeavors.
- USD
STEEL PIER SET for XI2 ASPHALT SYSTEMS
59616
Xi2 Asphalt Foundation System for Manufactured Adjustable Steel Piers
- USD
Beam Hook Top Pier Steel Head
MPH06
A reliable and efficient alternative to traditional dry-stacked blocks, our Steel Support Piers are designed and engineered to handle vertical loads with ease, providing a support rating of up to 6,000 lbs. These Support Piers are versatile in application, suitable for a wide range of factory-built structures including manufactured homes, mobile commercial units, classrooms, multiplexes, sheds, and similar structures. With the ability to withstand various wind zone conditions, except for “Exposure D” or areas within 1,500 ft. of the coastline, our Steel Support Piers are designed to provide exceptional stability and support. Available up to a maximum of 30 in. and in braced support as well, these Support Piers are compatible with a variety of heads to prevent movement after attachment to the beam or marriage line.
- USD
17.5 in. x 13.5 in. Galvanized XL Stabilizer Plate
59286
Tie Down’s XL Stabilizer Plate is an essential component for anchoring installations in Class 4 soils, as mandated by Florida regulations. With precise dimensions of 17.5 in. x 13.5 in., this plate offers ample surface area to enhance stability and distribute the load evenly. Crafted with a galvanized finish, the XL Stabilizer Plate provides exceptional resistance to corrosion and weathering, ensuring long-lasting performance in challenging environmental conditions.
- USD
1 - 9 of 9
1