close
Categories
Filter By
Brand
Division
Gross Weight (lbs.)
- 0.05 1
- 0.10 1
- 0.16 1
- 0.25 1
- 0.35 1
- 0.50 1
- 0.59 1
- 0.60 1
- 0.67 2
- 0.71 1
- 0.75 3
- 0.97 1
- 1.00 5
- 1.10 1
- 1.15 1
- 1.24 1
- 1.30 1
- 1.34 2
- 1.42 3
- 1.48 2
- 1.50 1
- 1.58 3
- 1.59 1
- 1.60 1
- 1.62 2
- 1.67 2
- 1.70 2
- 1.71 1
- 1.75 2
- 1.76 1
- 1.77 1
- 1.83 1
- 1.85 1
- 1.93 2
- 1.94 1
- 10.00 1
- 10.50 1
- 11.00 1
- 11.50 1
- 12.00 2
- 12.19 1
- 12.80 1
- 13.25 1
- 18.00 1
- 19.00 1
- 2.00 2
- 2.05 1
- 2.10 2
- 2.20 1
- 2.25 1
- 2.32 1
- 2.50 1
- 2.53 1
- 2.80 2
- 22.00 1
- 3.00 1
- 3.08 1
- 3.10 1
- 3.15 1
- 3.48 1
- 3.50 2
- 3.75 1
- 3.80 1
- 3.85 1
- 3.98 1
- 37.00 1
- 4.00 1
- 4.02 1
- 4.50 2
- 4.60 1
- 4.73 1
- 5.00 2
- 5.13 1
- 5.20 1
- 5.30 1
- 5.60 1
- 5.67 1
- 5.94 1
- 56.00 1
- 6.00 1
- 6.03 1
- 6.25 1
- 6.34 1
- 6.50 7
- 7.00 4
- 7.44 1
- 7.50 2
- 7.67 1
- 7.97 1
- 8.00 2
- 8.17 1
- 8.20 1
- 8.67 1
- 8.80 1
- 9.00 2
- 9.50 1
- 9.67 1
- 90.00 1
- 95.00 1
Warranty
12.00, 3.15, 1.60, 5.13, 3.98, 1.67, 1.83 - Manufactured Housing
9 items
30 in. Longitudinal Struts for Xi2
59016
30" Longitudinal Concrete Strut Only
- USD
Black Painted Cross Drive Rock Anchor Model #MRA With 48 in. Rods
59111
Tie Down's Cross Drive Rock Anchor is the ultimate solution for secure and precise anchoring into solid rock. Engineered with precision, this anchor is designed to be installed within 1 in. from the bottom of the anchor base, ensuring maximum stability. The swivel tensioning head allows for exact alignment during installation, providing a reliable and robust anchoring system. Perfect for Soil Class 1, this rock anchor is built to withstand demanding conditions and deliver exceptional performance. Its black-painted finish adds durability and protection against the elements, ensuring long-lasting reliability. Choose between the 30-inch or 48-inch rod length, depending on your anchoring requirements. Additionally, you have the option to purchase the head only or the 30-inch rod separately, offering versatility and convenience for your project. These anchors are tested to meet the stringent requirements of HUD 3280 and 3285, and listed and labeled by RADCO #1349, ensuring compliance with industry standards and regulations.
- USD
10 Gauge Zinc-Plated Swivel Strap Connector, Connector Only
59336
Designed for attachment of uplift straps at the factory OEM or in the field, Tie Down's Swivel "L" Tie Plate Assembly offers versatile solutions for enhanced structural integrity. The "L" Plate configuration optimizes uplift support by attaching securely to the floor and angling down alongside the rim joist, providing robust uplift reinforcement. Customize your assembly with the option to order a heavier finish coating, ensuring durability that matches your specific requirements. The "L" Tie Plate itself is crafted from 14-gauge pre-galvanized steel, ensuring enduring performance. The swivel strap connector, available separately, is built from 10-gauge zinc, offering steadfast support. Whether bolting the swivel to the tie strap or crimping the strap through the swivel connector, the installation process adapts to your preferences, guaranteeing a secure connection. Affix the assembly with confidence using either 0.131 x 1-1/2” nails or #8 x 1-1/2” screws, engaging at least 50% of the nine pre-punched holes in the strap, guaranteeing a secure and reliable hold. Tailor your solution with the choice of a comprehensive kit, a separate swivel strap connector, or the "L" Tie Plate only, ensuring flexibility to match your unique needs. The kit option includes essential components for a hassle-free installation, such as the connector, “L” Tie Plate, bolt, two washers, and a Nyloc nut, offering a comprehensive uplift support solution. Rest easy knowing that the Swivel "L" Tie Plate Assembly is backed by a 1-year warranty, underlining its quality and dependability.
- USD
3 in. x 16 in. Galvanized Tie Plate
59341
This tie plate, composed of 14 gauge, pre-galvanized, zinc-plated steel, ensures utmost durability and reliability with an impressive 2,400 lbs. capacity. Measuring 3 in. x 16 in., this stabilizer promises utmost stability in every manufactured home project.
- USD
12 ft. Frame Tie with Buckle, 30 pack
59144
Tie Down's Frame Tie with Buckle includes a galvanized strap pre-attached with a durable buckle, ensuring a secure and hassle-free connection to the frame. The process is straightforward: effortlessly push the strap's end between the inside of the frame "I" beam and the floor. Position the buckle at the upper end of the "I" beam frame, then wrap the strap around the beam and thread its end through the slot in the buckle. A simple pull secures the strap, keeping the buckle in place for added stability. Choose the perfect length for your project with options ranging from 7 to 16 ft. Available in convenient quantities, you can opt for boxes containing 30 or 50 kits or bundles of 8 kits each. With Tie Down's Frame Tie with Buckle, you're equipped with a smart solution that streamlines installation, saving you time and effort while ensuring a dependable connection to the frame.
- USD
Xi2 Asphalt Foundation, Block Set
59604
Tie Down's Xi2 foundation system provides windstorm and seismic protection for your home on ground, concrete, or asphalt. The lateral and longitudinal components easily combine to address both wind and seismic loads imposed on all four sides of your home. This would cover wind elements for wind zones I, II, & III. The Xi2 system can be used with single and double stack block configurations as well as steel pier options, with easy installation on I-beams, C-beams, and CR-beams.
- USD
Marriage Wall Bracket, Bracket with 5 ft. Strap
59698
Designed to facilitate precise and secure installation of vertical ties, Tie Down’s Marriage Wall Bracket is a crucial element for shear wall applications, marriage ridge beam supports, and rim plates in strict accordance with factory guidelines. Crafted to provide unwavering support, it's the ideal solution for reinforcing marriage walls or ridge beam connections, aligning perfectly with specified factory-marked column openings. This versatile bracket can be tailored to your needs, available with an optional heavier finish coating for enhanced durability. Crafted from sturdy 9-gauge painted black steel, it's engineered to withstand the demands of construction environments. Backed by a 1-year warranty, you can trust in the quality and durability of this component. Installation is streamlined and efficient, allowing for bolted attachment with a swivel to the bracket's end or through the slot, or a seamless fit through a swivel connector. To ensure steadfast stability, secure the bracket using two 3/8” x 3” fully threaded lag bolts from the bottom into the perimeter rail. Designed for robust performance, this Marriage Wall Bracket boasts an impressive 2,400 lb. design load capacity, reinforcing your structures and bolstering their resilience against various challenges. It's available in two configurations: the bracket alone or the bracket bundled with a 5 ft. strap, offering flexibility to suit your specific project requirements.
- USD
14 in. Steel Support Piers, 6000 lb. Capacity
MPP14
A reliable and efficient alternative to traditional dry-stacked blocks, our Steel Support Piers are designed and engineered to handle vertical loads with ease, providing a support rating of up to 6,000 lbs. These Support Piers are versatile in application, suitable for a wide range of factory-built structures including manufactured homes, mobile commercial units, classrooms, multiplexes, sheds, and similar structures. With the ability to withstand various wind zone conditions, except for “Exposure D” or areas within 1,500 ft. of the coastline, our Steel Support Piers are designed to provide exceptional stability and support. Available up to a maximum of 30 in. and in braced support as well, these Support Piers are compatible with a variety of heads to prevent movement after attachment to the beam or marriage line.
- USD
18 in. Steel Support Piers, 6000 lb. Capacity
MPP18
A reliable and efficient alternative to traditional dry-stacked blocks, our Steel Support Piers are designed and engineered to handle vertical loads with ease, providing a support rating of up to 6,000 lbs. These Support Piers are versatile in application, suitable for a wide range of factory-built structures including manufactured homes, mobile commercial units, classrooms, multiplexes, sheds, and similar structures. With the ability to withstand various wind zone conditions, except for “Exposure D” or areas within 1,500 ft. of the coastline, our Steel Support Piers are designed to provide exceptional stability and support. Available up to a maximum of 30 in. and in braced support as well, these Support Piers are compatible with a variety of heads to prevent movement after attachment to the beam or marriage line.
- USD
1 - 9 of 9
1