close
Filter By
Brand
Color
Division
Gross Weight (lbs.)
- 0.05 1
- 0.10 1
- 0.16 1
- 0.25 1
- 0.35 1
- 0.50 1
- 0.59 1
- 0.60 1
- 0.67 2
- 0.71 1
- 0.75 3
- 0.97 1
- 1.00 5
- 1.10 1
- 1.15 1
- 1.24 1
- 1.30 1
- 1.34 2
- 1.42 3
- 1.48 2
- 1.50 1
- 1.58 3
- 1.59 1
- 1.60 1
- 1.62 2
- 1.67 2
- 1.70 2
- 1.71 1
- 1.75 2
- 1.76 1
- 1.77 1
- 1.83 1
- 1.85 1
- 1.93 2
- 1.94 1
- 10.00 1
- 10.50 1
- 11.00 1
- 11.50 1
- 12.00 2
- 12.19 1
- 12.80 1
- 13.25 1
- 18.00 1
- 19.00 1
- 2.00 2
- 2.05 1
- 2.10 2
- 2.20 1
- 2.25 1
- 2.32 1
- 2.50 1
- 2.53 1
- 2.80 2
- 22.00 1
- 3.00 1
- 3.08 1
- 3.10 1
- 3.15 1
- 3.48 1
- 3.50 2
- 3.75 1
- 3.80 1
- 3.85 1
- 3.98 1
- 37.00 1
- 4.00 1
- 4.02 1
- 4.50 2
- 4.60 1
- 4.73 1
- 5.00 2
- 5.13 1
- 5.20 1
- 5.30 1
- 5.60 1
- 5.67 1
- 5.94 1
- 56.00 1
- 6.00 1
- 6.03 1
- 6.25 1
- 6.34 1
- 6.50 7
- 7.00 4
- 7.44 1
- 7.50 2
- 7.67 1
- 7.97 1
- 8.00 2
- 8.17 1
- 8.20 1
- 8.67 1
- 8.80 1
- 9.00 2
- 9.50 1
- 9.67 1
- 90.00 1
- 95.00 1
Warranty
Width (in.)
1.85, 0.60, 6.03, 2.50, 5.20, 6.00, 1.75, 5.60 - Manufactured Housing
9 items
ANGLE FRAME BRACKET
59009
Crafted from high-quality steel, Tie Down's Angle Frame Bracket serves as a pivotal connection point, ensuring a robust foundation for your structures. Designed for the attachment of longitudinal anchors to I-beams at both ends of the home, the Angle Frame Bracket is a fundamental component for anchoring security. With a 1-year warranty, Tie Down's commitment to quality is evident in the durable construction of the Angle Frame Bracket. Prioritize safety and stability by strategically determining anchor and stabilizer plate locations, along with bracket placement on the I-beam. Ensuring a strap angle of 60 degrees or lower optimizes the effectiveness of your anchoring solution. The installation process is straightforward: Drill a ½-inch hole centered in the I-beam, at least 4 inches from the edge. For wind zones II and III, connect two frame brackets with a ½-inch grade 5 bolt and nut; for wind zone I, one frame bracket is sufficient. Attach the swivel connector and strap to the angle frame brackets using ½-inch grade 5 bolts and nuts, then tighten securely.
- USD
37 ft. G60 Galvanized Strap
59155
Tie Down's Galvanized Steel Strap is engineered to meet the stringent requirements set by HUD Codes 3280 and 3285(2). Crafted from high-quality galvanized steel, this strap is designed to provide superior strength and durability for your mobile home anchoring needs. Conforming to ASTM D3953-97 standards for strapping, flat steel, and seals, this Type 1, Grade 1, Finish B steel strap boasts a minimum total capacity of 4,725 lbs. and a working capacity of 3,150 lbs. Its exceptional load-bearing capabilities ensure reliable and secure anchoring for your valuable property. For added convenience during installation and monitoring, the strap is conveniently marked every 5 ft., allowing you to easily measure and position it accurately. Tie Down's Galvanized Steel Strap is built to withstand the elements, offering reliable protection against weather deterioration and corrosion. The galvanized coating provides equivalent weather resistance to zinc-coated steel, ensuring the longevity and integrity of the strap even in challenging outdoor conditions.
- USD
8 ft. G-120 Strap with Swivel Connectors, 50 per box
59213
Tie Down's Universal Swivel Strap Connector empowers you to achieve secure bolted swivel or slotted clip attachments by seamlessly connecting straps to beam clamps and uplift brackets. Crafted for excellence, these connectors are made with G-120 strap material, ensuring exceptional strength and durability. Offering a comprehensive range of installation options, you have the flexibility to choose between swivel strap and I-beam bracket connections, sidewall slotted configurations, sidewall setups with nut and bolt fasteners, and longitudinal I-beam installations. Engineered to meet the demands of wind zones 2 and 3, Tie Down's Universal Swivel Strap Connector excels in challenging conditions, ensuring reliable performance in diverse construction environments. Each package includes one high-quality strap and is available in quantities of 30 or 50 per box or 8 per bundle of connectors.
- USD
Iron Root Double Head Double Helix Manufactured Home Earth Anchors, Model MI2H64 With 3/4 In. Rod, 36 In. Long, 4 In. & 6 In. Helix, Class 4A, Black
59250
Available in both black paint and galvanized finishes (galvanized by special order), Tie Down's Iron Root Double Head Double Helix Manufactured Home Earth Anchors come with a 1-year warranty, assuring you of their quality and durability. The distinctive double-headed feature of these anchors enables the secure passage of two bolts, offering enhanced strength and attachment capabilities. Positioned with plates at the forefront of the anchor, these double heads connect seamlessly to the frame, serving the dual purpose of uplift protection and sidewall connections. Specifically designed for wind zones 2 and 3, these anchors extend their versatility across various wind conditions, ensuring steadfast stability. With either two 4-in. helixes or one 4-in. and one 6-in. helix, these anchors penetrate the soil with confidence, anchoring your manufactured home in place. Engineered for uplift and frame tie applications, these anchors provide a tailored solution for sidewall and I-beam connections. The innovative design encourages a range of strapping and attachment possibilities, including slotted bolts, contributing to the flexibility of installation. Designed for soil classes 2 and 4A, these anchors are meticulously crafted to thrive in their respective environments. These anchors are tested to meet the stringent requirements of HUD 3280 and 3285, and listed and labeled by RADCO #1349, ensuring compliance with industry standards and regulations.
- USD
16 in. x 22.5 in. ABS/PLASTIC FOUNDATION PADS, 2.5 sq. ft.
59301
Designed to be placed under and support steel piers that hold up your mobile home, Tie Down's ABS Foundation Pads offer an innovative and efficient solution for your foundation needs. These pads are lighter than traditional concrete, leading to labor and cost savings during installation. With larger pad sizes, they increase spacing, saving valuable time and materials. Environmentally conscious, these foundation pads are made from recycled materials, contributing to sustainability efforts. Their stackable design allows for easy expansion, creating larger pad areas and wider pier spacing, ideal for various applications. The ABS Foundation Pads come in both single and multi-pad configurations, catering to different soil capacities. They are approved for use by HUD 3285.312(3) and are listed and labeled by RADCO #1345, ensuring compliance with industry standards.
- USD
8 ft. Frame Tie with Buckle, 50 per box
59146
Tie Down's Frame Tie with Buckle includes a galvanized strap pre-attached with a durable buckle, ensuring a secure and hassle-free connection to the frame. The process is straightforward: effortlessly push the strap's end between the inside of the frame "I" beam and the floor. Position the buckle at the upper end of the "I" beam frame, then wrap the strap around the beam and thread its end through the slot in the buckle. A simple pull secures the strap, keeping the buckle in place for added stability. Choose the perfect length for your project with options ranging from 7 to 16 ft. Available in convenient quantities, you can opt for boxes containing 30 or 50 kits or bundles of 8 kits each. With Tie Down's Frame Tie with Buckle, you're equipped with a smart solution that streamlines installation, saving you time and effort while ensuring a dependable connection to the frame.
- USD
Marriage Wall Bracket, Bracket Only
59699
Designed to facilitate precise and secure installation of vertical ties, Tie Down’s Marriage Wall Bracket is a crucial element for shear wall applications, marriage ridge beam supports, and rim plates in strict accordance with factory guidelines. Crafted to provide unwavering support, it's the ideal solution for reinforcing marriage walls or ridge beam connections, aligning perfectly with specified factory-marked column openings. This versatile bracket can be tailored to your needs, available with an optional heavier finish coating for enhanced durability. Crafted from sturdy 9-gauge painted black steel, it's engineered to withstand the demands of construction environments. Backed by a 1-year warranty, you can trust in the quality and durability of this component. Installation is streamlined and efficient, allowing for bolted attachment with a swivel to the bracket's end or through the slot, or a seamless fit through a swivel connector. To ensure steadfast stability, secure the bracket using two 3/8” x 3” fully threaded lag bolts from the bottom into the perimeter rail. Designed for robust performance, this Marriage Wall Bracket boasts an impressive 2,400 lb. design load capacity, reinforcing your structures and bolstering their resilience against various challenges. It's available in two configurations: the bracket alone or the bracket bundled with a 5 ft. strap, offering flexibility to suit your specific project requirements.
- USD
20 in. Steel Support Piers, 6000 lb. Capacity
MPP20
A reliable and efficient alternative to traditional dry-stacked blocks, our Steel Support Piers are designed and engineered to handle vertical loads with ease, providing a support rating of up to 6,000 lbs. These Support Piers are versatile in application, suitable for a wide range of factory-built structures including manufactured homes, mobile commercial units, classrooms, multiplexes, sheds, and similar structures. With the ability to withstand various wind zone conditions, except for “Exposure D” or areas within 1,500 ft. of the coastline, our Steel Support Piers are designed to provide exceptional stability and support. Available up to a maximum of 30 in. and in braced support as well, these Support Piers are compatible with a variety of heads to prevent movement after attachment to the beam or marriage line.
- USD
30 in. long, 1/2 in. rod, 4 in. helix Galvanized EYE ANCHORS
59057
Tie Down's Eye Anchors offer a versatile and dependable solution for securing a wide range of items, making them an essential addition to various outdoor projects. Whether it's anchoring trees, pool covers, tents, canopies, boats, airplanes, fencing, playground equipment, carports, awnings, outdoor decorations, or antennas, these anchors prove their reliability. They have been effectively utilized to secure dog enclosures, swing sets, and sheds, providing stability without the need for storm-prone areas. Available in both black paint and galvanized finishes, these anchors boast durability and visual appeal. With a 1-year warranty, they provide assurance of quality and performance. Installation is hassle-free - simply screw the anchor into the ground. The strength of the anchor's hold varies based on soil conditions, making them adaptable to various environments. Rope, cable, or ratchet straps can be used to ensure a secure attachment. Tie Down offers standard sizes for convenience, but also welcomes custom orders for anchors tailored to specific needs. The anchors come with the choice of either a 1/2-inch or 5/8-inch rod and a 4-inch or 6-inch helix, allowing for versatility in applications. These anchors are tested to meet the stringent requirements of HUD 3280 and 3285, and listed and labeled by RADCO #1349, ensuring compliance with industry standards and regulations.
- USD
1 - 9 of 9
1