Manufactured Housing

30 in. Coral Anchor

59096

The Coral Anchor is your solution for anchoring in coral formations. The Coral Anchor is built to be driven with ease – the 30 in. rod effortlessly penetrates the coral with the assistance of an impact hammer. The anchor's barbs ensure steadfast embedment, providing unparalleled stability and reliability. Designed for use at a 60-degree angle (30 degrees from vertical) into the coral. Not for vertical anchorage. These anchors are tested to meet the stringent requirements of HUD 3280 and 3285, and listed and labeled by RADCO #1349, ensuring compliance with industry standards and regulations.

$0.00

View Details

8 in. Beam Clamps

59005

Designed to effortlessly clamp over the main beam, Tie Down's Beam Clamps provide an ideal attachment point for your various strapping needs. Available in versatile sizes of 3 inches, 4 inches, and 8 inches (DBL) for double beam applications, these clamps offer a wide range of options to suit your project requirements. Tie Down's Beam Clamps are engineered to enhance your connection solutions with optimal flexibility. Crafted from high-quality steel, these clamps are built to last, delivering enduring performance even in demanding environments. Experience hassle-free installation that saves you valuable time and effort. With a straightforward design, these clamps ensure a quick and efficient setup process. Tie Down's commitment to quality and customer satisfaction is reflected in the included 1-year warranty, providing you with peace of mind as you put these clamps to work.

$0.00

View Details

Black Painted Cross Drive Rock Anchor Model #MRA With 48 in. Rods

59111

Tie Down's Cross Drive Rock Anchor is the ultimate solution for secure and precise anchoring into solid rock. Engineered with precision, this anchor is designed to be installed within 1 in. from the bottom of the anchor base, ensuring maximum stability. The swivel tensioning head allows for exact alignment during installation, providing a reliable and robust anchoring system. Perfect for Soil Class 1, this rock anchor is built to withstand demanding conditions and deliver exceptional performance. Its black-painted finish adds durability and protection against the elements, ensuring long-lasting reliability. Choose between the 30-inch or 48-inch rod length, depending on your anchoring requirements. Additionally, you have the option to purchase the head only or the 30-inch rod separately, offering versatility and convenience for your project. These anchors are tested to meet the stringent requirements of HUD 3280 and 3285, and listed and labeled by RADCO #1349, ensuring compliance with industry standards and regulations.

$0.00

View Details

Xi2 Asphalt Foundation, Block Set

59604

Tie Down's Xi2 foundation system provides windstorm and seismic protection for your home on ground, concrete, or asphalt. The lateral and longitudinal components easily combine to address both wind and seismic loads imposed on all four sides of your home. This would cover wind elements for wind zones I, II, & III. The Xi2 system can be used with single and double stack block configurations as well as steel pier options, with easy installation on I-beams, C-beams, and CR-beams.

$0.00

View Details

4 in. x 6 in. x 1 in. PADS AND PIERS ABS SHIMS/WEDGES

59663

Tie Down's ABS Shims/Wedges, measuring 4 in. x 6 in. x 1 in., are expertly crafted to deliver impeccable support and alignment in pier structures. These shims excel in filling gaps and securing piers between the pier plate and main beam, ensuring a solid and level foundation for your structure. Precision is paramount. Whether it's leveling your home or bridging gaps between the base of the main beam and the top of the pier cap, our ABS Shims/Wedges deliver the perfect solution. Installation is straightforward and hassle-free. Following the placement of an 8" x 8" x 16" concrete block atop pier footings, determine the gap size between the pier and beam. This measurement dictates the number and size of shims required (minimum of 2 inches), maintaining a clearance of less than 1 inch between pier top and beam bottom. Our shims can be double-stacked—2 inches on 2 inches or 1 inch on 2 inches—to adapt precisely to your needs. For double pier plate stacks, conveniently position two cap plates side by side. ABS Shims/Wedges must be used in pairs, ensuring a reliable and uniform support system for your pier structure. Fully approved for use by HUD 3285.312(3), attesting to their superior quality and adherence to industry standards, our ABS Shims/Wedges are thoughtfully crafted from recycled ABS materials, aligning with environmentally friendly construction choices.

$0.00

View Details

Xi2 Asphalt Perimeter C Beam Hardware

59618

Xi2 Asphalt System Hardware Kit for Perimeter C or CR Beam

$0.00

View Details

18 in. Steel Support Piers, 6000 lb. Capacity

MPP18

A reliable and efficient alternative to traditional dry-stacked blocks, our Steel Support Piers are designed and engineered to handle vertical loads with ease, providing a support rating of up to 6,000 lbs. These Support Piers are versatile in application, suitable for a wide range of factory-built structures including manufactured homes, mobile commercial units, classrooms, multiplexes, sheds, and similar structures. With the ability to withstand various wind zone conditions, except for “Exposure D” or areas within 1,500 ft. of the coastline, our Steel Support Piers are designed to provide exceptional stability and support. Available up to a maximum of 30 in. and in braced support as well, these Support Piers are compatible with a variety of heads to prevent movement after attachment to the beam or marriage line.

$0.00

View Details

24 in. Steel Braced Support Piers, 6000 lb. Capacity

MPP24

A reliable and efficient alternative to traditional dry-stacked blocks, our Steel Support Piers are designed and engineered to handle vertical loads with ease, providing a support rating of up to 6,000 lbs. These Support Piers are versatile in application, suitable for a wide range of factory-built structures including manufactured homes, mobile commercial units, classrooms, multiplexes, sheds, and similar structures. With the ability to withstand various wind zone conditions, except for “Exposure D” or areas within 1,500 ft. of the coastline, our Steel Support Piers are designed to provide exceptional stability and support. Available up to a maximum of 30 in. and in braced support as well, these Support Piers are compatible with a variety of heads to prevent movement after attachment to the beam or marriage line.

$0.00

View Details

30 in. long, 1/2 in. rod, 4 in. helix Galvanized EYE ANCHORS

59057

Tie Down's Eye Anchors offer a versatile and dependable solution for securing a wide range of items, making them an essential addition to various outdoor projects. Whether it's anchoring trees, pool covers, tents, canopies, boats, airplanes, fencing, playground equipment, carports, awnings, outdoor decorations, or antennas, these anchors prove their reliability. They have been effectively utilized to secure dog enclosures, swing sets, and sheds, providing stability without the need for storm-prone areas. Available in both black paint and galvanized finishes, these anchors boast durability and visual appeal. With a 1-year warranty, they provide assurance of quality and performance. Installation is hassle-free - simply screw the anchor into the ground. The strength of the anchor's hold varies based on soil conditions, making them adaptable to various environments. Rope, cable, or ratchet straps can be used to ensure a secure attachment. Tie Down offers standard sizes for convenience, but also welcomes custom orders for anchors tailored to specific needs. The anchors come with the choice of either a 1/2-inch or 5/8-inch rod and a 4-inch or 6-inch helix, allowing for versatility in applications. These anchors are tested to meet the stringent requirements of HUD 3280 and 3285, and listed and labeled by RADCO #1349, ensuring compliance with industry standards and regulations.

$0.00

View Details