Filter Sort
close
1 - 6 of 6
Black Painted CROSS DRIVE ROCK ANCHOR Model #MRA with 30 in. Rod

Black Painted CROSS DRIVE ROCK ANCHOR Model #MRA with 30 in. Rod

59110

Tie Down's Cross Drive Rock Anchor is the ultimate solution for secure and precise anchoring into solid rock. Engineered with precision, this anchor is designed to be installed within 1 in. from the bottom of the anchor base, ensuring maximum stability. The swivel tensioning head allows for exact alignment during installation, providing a reliable and robust anchoring system. Perfect for Soil Class 1, this rock anchor is built to withstand demanding conditions and deliver exceptional performance. Its black-painted finish adds durability and protection against the elements, ensuring long-lasting reliability. Choose between the 30-inch or 48-inch rod length, depending on your anchoring requirements. Additionally, you have the option to purchase the head only or the 30-inch rod separately, offering versatility and convenience for your project. These anchors are tested to meet the stringent requirements of HUD 3280 and 3285, and listed and labeled by RADCO #1349, ensuring compliance with industry standards and regulations.
View Details
Painted Black X-PLATE ANCHOR

Painted Black X-PLATE ANCHOR

59118

The X-Plate Anchor is the ultimate solution for stabilizing structures in challenging Class 2 soils. With an impressive 2,200 lb. working load capacity at a maximum 50-degree angle, this anchor delivers exceptional stability and reliability. Designed for horizontal anchorage, the X-Plate Anchor is perfect for securing various structures, ensuring they remain firmly in place. The anchor's durable black paint finish not only enhances its appearance but also provides excellent protection against environmental elements, ensuring long-lasting performance. Please note that the X-Plate Anchor is not intended for vertical anchorage. These anchors are tested to meet the stringent requirements of HUD 3280 and 3285, and listed and labeled by RADCO #1349, ensuring compliance with industry standards and regulations.
View Details
Iron Root Double Head Double Helix Manufactured Home Earth Anchors, Model MI2H64 With 3/4 In. Rod, 36 In. Long, 4 In. & 6 In. Helix, Class 4A, Black

Iron Root Double Head Double Helix Manufactured Home Earth Anchors, Model MI2H64 With 3/4 In. Rod, 36 In. Long, 4 In. & 6 In. Helix, Class 4A, Black

59250

Available in both black paint and galvanized finishes (galvanized by special order), Tie Down's Iron Root Double Head Double Helix Manufactured Home Earth Anchors come with a 1-year warranty, assuring you of their quality and durability. The distinctive double-headed feature of these anchors enables the secure passage of two bolts, offering enhanced strength and attachment capabilities. Positioned with plates at the forefront of the anchor, these double heads connect seamlessly to the frame, serving the dual purpose of uplift protection and sidewall connections. Specifically designed for wind zones 2 and 3, these anchors extend their versatility across various wind conditions, ensuring steadfast stability. With either two 4-in. helixes or one 4-in. and one 6-in. helix, these anchors penetrate the soil with confidence, anchoring your manufactured home in place. Engineered for uplift and frame tie applications, these anchors provide a tailored solution for sidewall and I-beam connections. The innovative design encourages a range of strapping and attachment possibilities, including slotted bolts, contributing to the flexibility of installation. Designed for soil classes 2 and 4A, these anchors are meticulously crafted to thrive in their respective environments. These anchors are tested to meet the stringent requirements of HUD 3280 and 3285, and listed and labeled by RADCO #1349, ensuring compliance with industry standards and regulations.
View Details
4 in. x 6 in. x 1 in. PADS AND PIERS ABS SHIMS/WEDGES

4 in. x 6 in. x 1 in. PADS AND PIERS ABS SHIMS/WEDGES

59663

Tie Down's ABS Shims/Wedges, measuring 4 in. x 6 in. x 1 in., are expertly crafted to deliver impeccable support and alignment in pier structures. These shims excel in filling gaps and securing piers between the pier plate and main beam, ensuring a solid and level foundation for your structure. Precision is paramount. Whether it's leveling your home or bridging gaps between the base of the main beam and the top of the pier cap, our ABS Shims/Wedges deliver the perfect solution. Installation is straightforward and hassle-free. Following the placement of an 8" x 8" x 16" concrete block atop pier footings, determine the gap size between the pier and beam. This measurement dictates the number and size of shims required (minimum of 2 inches), maintaining a clearance of less than 1 inch between pier top and beam bottom. Our shims can be double-stacked—2 inches on 2 inches or 1 inch on 2 inches—to adapt precisely to your needs. For double pier plate stacks, conveniently position two cap plates side by side. ABS Shims/Wedges must be used in pairs, ensuring a reliable and uniform support system for your pier structure. Fully approved for use by HUD 3285.312(3), attesting to their superior quality and adherence to industry standards, our ABS Shims/Wedges are thoughtfully crafted from recycled ABS materials, aligning with environmentally friendly construction choices.
View Details
IRON ROOT DOUBLE HEAD DOUBLE HELIX ANCHOR, MODEL MI2H64

IRON ROOT DOUBLE HEAD DOUBLE HELIX ANCHOR, MODEL MI2H64

59250G

Available in both black paint and galvanized finishes (galvanized by special order), Tie Down's Iron Root Double Head Double Helix Manufactured Home Earth Anchors come with a 1-year warranty, assuring you of their quality and durability. The distinctive double-headed feature of these anchors enables the secure passage of two bolts, offering enhanced strength and attachment capabilities. Positioned with plates at the forefront of the anchor, these double heads connect seamlessly to the frame, serving the dual purpose of uplift protection and sidewall connections. Specifically designed for wind zones 2 and 3, these anchors extend their versatility across various wind conditions, ensuring steadfast stability. With either two 4-in. helixes or one 4-in. and one 6-in. helix, these anchors penetrate the soil with confidence, anchoring your manufactured home in place. Engineered for uplift and frame tie applications, these anchors provide a tailored solution for sidewall and I-beam connections. The innovative design encourages a range of strapping and attachment possibilities, including slotted bolts, contributing to the flexibility of installation. Designed for soil classes 2 and 4A, these anchors are meticulously crafted to thrive in their respective environments. These anchors are tested to meet the stringent requirements of HUD 3280 and 3285, and listed and labeled by RADCO #1349, ensuring compliance with industry standards and regulations.
View Details
14 ft. FRAME TIE WITH HOOK (MHT14)

14 ft. FRAME TIE WITH HOOK (MHT14)

59214

Tie Down's Frame Tie with Hook offers a quick and secure solution for installing frame ties with ease. Crafted from heavy-duty 1/4 inch steel, the robust hook ensures a strong and reliable connection to the frame, guaranteeing the safety and stability of your structure. This frame tie is constructed with certified galvanized steel strapping, adhering to the stringent NCS BCS A225.1 (ANSI A119.3) and HUD specifications. The galvanized coating provides excellent protection against corrosion, making it suitable for various environmental conditions. Choose from multiple options to suit your needs, available in boxes of 30 or 50 as well as 8 per bundle. The frame ties are offered in various lengths, ranging from 6 feet to 16 feet, allowing you to select the perfect fit for your project.
View Details
1 - 6 of 6
1