close
Filter By
Brand
Division
Gross Weight (lbs.)
- 0.05 1
- 0.10 1
- 0.16 1
- 0.25 1
- 0.35 1
- 0.50 1
- 0.59 1
- 0.60 1
- 0.67 2
- 0.71 1
- 0.75 3
- 0.97 1
- 1.00 5
- 1.10 1
- 1.15 1
- 1.24 1
- 1.30 1
- 1.34 2
- 1.42 3
- 1.48 2
- 1.50 1
- 1.58 3
- 1.59 1
- 1.60 1
- 1.62 2
- 1.67 2
- 1.70 2
- 1.71 1
- 1.75 2
- 1.76 1
- 1.77 1
- 1.83 1
- 1.85 1
- 1.93 2
- 1.94 1
- 10.00 1
- 10.50 1
- 11.00 1
- 11.50 1
- 12.00 2
- 12.19 1
- 12.80 1
- 13.25 1
- 18.00 1
- 19.00 1
- 2.00 2
- 2.05 1
- 2.10 2
- 2.20 1
- 2.25 1
- 2.32 1
- 2.50 1
- 2.53 1
- 2.80 2
- 22.00 1
- 3.00 1
- 3.08 1
- 3.10 1
- 3.15 1
- 3.48 1
- 3.50 2
- 3.75 1
- 3.80 1
- 3.85 1
- 3.98 1
- 37.00 1
- 4.00 1
- 4.02 1
- 4.50 2
- 4.60 1
- 4.73 1
- 5.00 2
- 5.13 1
- 5.20 1
- 5.30 1
- 5.60 1
- 5.67 1
- 5.94 1
- 56.00 1
- 6.00 1
- 6.03 1
- 6.25 1
- 6.34 1
- 6.50 7
- 7.00 4
- 7.44 1
- 7.50 2
- 7.67 1
- 7.97 1
- 8.00 2
- 8.17 1
- 8.20 1
- 8.67 1
- 8.80 1
- 9.00 2
- 9.50 1
- 9.67 1
- 90.00 1
- 95.00 1
Length (in.)
Warranty
Width (in.)
0.25, 1.60, 5.67, 1.75, 2.32, 3.10, 8.17, 0.60 - Manufactured Housing
9 items
ANGLE FRAME BRACKET
59009
Crafted from high-quality steel, Tie Down's Angle Frame Bracket serves as a pivotal connection point, ensuring a robust foundation for your structures. Designed for the attachment of longitudinal anchors to I-beams at both ends of the home, the Angle Frame Bracket is a fundamental component for anchoring security. With a 1-year warranty, Tie Down's commitment to quality is evident in the durable construction of the Angle Frame Bracket. Prioritize safety and stability by strategically determining anchor and stabilizer plate locations, along with bracket placement on the I-beam. Ensuring a strap angle of 60 degrees or lower optimizes the effectiveness of your anchoring solution. The installation process is straightforward: Drill a ½-inch hole centered in the I-beam, at least 4 inches from the edge. For wind zones II and III, connect two frame brackets with a ½-inch grade 5 bolt and nut; for wind zone I, one frame bracket is sufficient. Attach the swivel connector and strap to the angle frame brackets using ½-inch grade 5 bolts and nuts, then tighten securely.
- USD
35 ft. Galvanized G-60 Strap
59150
Tie Down's Galvanized Steel Strap is engineered to meet the stringent requirements set by HUD Codes 3280 and 3285(2). Crafted from high-quality galvanized steel, this strap is designed to provide superior strength and durability for your mobile home anchoring needs. Conforming to ASTM D3953-97 standards for strapping, flat steel, and seals, this Type 1, Grade 1, Finish B steel strap boasts a minimum total capacity of 4,725 lbs. and a working capacity of 3,150 lbs. Its exceptional load-bearing capabilities ensure reliable and secure anchoring for your valuable property. For added convenience during installation and monitoring, the strap is conveniently marked every 5 ft., allowing you to easily measure and position it accurately. Tie Down's Galvanized Steel Strap is built to withstand the elements, offering reliable protection against weather deterioration and corrosion. The galvanized coating provides equivalent weather resistance to zinc-coated steel, ensuring the longevity and integrity of the strap even in challenging outdoor conditions.
- USD
8 ft. G-120 Strap with Swivel Connectors, 50 per box
59213
Tie Down's Universal Swivel Strap Connector empowers you to achieve secure bolted swivel or slotted clip attachments by seamlessly connecting straps to beam clamps and uplift brackets. Crafted for excellence, these connectors are made with G-120 strap material, ensuring exceptional strength and durability. Offering a comprehensive range of installation options, you have the flexibility to choose between swivel strap and I-beam bracket connections, sidewall slotted configurations, sidewall setups with nut and bolt fasteners, and longitudinal I-beam installations. Engineered to meet the demands of wind zones 2 and 3, Tie Down's Universal Swivel Strap Connector excels in challenging conditions, ensuring reliable performance in diverse construction environments. Each package includes one high-quality strap and is available in quantities of 30 or 50 per box or 8 per bundle of connectors.
- USD
16 in. x 18 in. ABS/PLASTIC FOUNDATION PADS, 2 sq. ft. for block piers and steel piers
59300
Designed to be placed under and support piers that hold up your mobile home, Tie Down's ABS Foundation Pads offer an innovative and efficient solution for your foundation needs. These pads are lighter than traditional concrete, leading to labor and cost savings during installation. With larger pad sizes, they increase spacing, saving valuable time and materials. Environmentally conscious, these foundation pads are made from recycled materials, contributing to sustainability efforts. Their stackable design allows for easy expansion, creating larger pad areas and wider pier spacing, ideal for various applications. Intended for use with either block or steel piers, the ABS Foundation Pads come in both single and multi-pad configurations, catering to different soil capacities. They are approved for use by HUD 3285.312(3) and are listed and labeled by RADCO #1345, ensuring compliance with industry standards.
- USD
4 in. x 6 in. x 1 in. PADS AND PIERS ABS SHIMS/WEDGES
59663
Tie Down's ABS Shims/Wedges, measuring 4 in. x 6 in. x 1 in., are expertly crafted to deliver impeccable support and alignment in pier structures. These shims excel in filling gaps and securing piers between the pier plate and main beam, ensuring a solid and level foundation for your structure. Precision is paramount. Whether it's leveling your home or bridging gaps between the base of the main beam and the top of the pier cap, our ABS Shims/Wedges deliver the perfect solution. Installation is straightforward and hassle-free. Following the placement of an 8" x 8" x 16" concrete block atop pier footings, determine the gap size between the pier and beam. This measurement dictates the number and size of shims required (minimum of 2 inches), maintaining a clearance of less than 1 inch between pier top and beam bottom. Our shims can be double-stacked—2 inches on 2 inches or 1 inch on 2 inches—to adapt precisely to your needs. For double pier plate stacks, conveniently position two cap plates side by side. ABS Shims/Wedges must be used in pairs, ensuring a reliable and uniform support system for your pier structure. Fully approved for use by HUD 3285.312(3), attesting to their superior quality and adherence to industry standards, our ABS Shims/Wedges are thoughtfully crafted from recycled ABS materials, aligning with environmentally friendly construction choices.
- USD
Marriage Wall Bracket, Bracket with 5 ft. Strap
59698
Designed to facilitate precise and secure installation of vertical ties, Tie Down’s Marriage Wall Bracket is a crucial element for shear wall applications, marriage ridge beam supports, and rim plates in strict accordance with factory guidelines. Crafted to provide unwavering support, it's the ideal solution for reinforcing marriage walls or ridge beam connections, aligning perfectly with specified factory-marked column openings. This versatile bracket can be tailored to your needs, available with an optional heavier finish coating for enhanced durability. Crafted from sturdy 9-gauge painted black steel, it's engineered to withstand the demands of construction environments. Backed by a 1-year warranty, you can trust in the quality and durability of this component. Installation is streamlined and efficient, allowing for bolted attachment with a swivel to the bracket's end or through the slot, or a seamless fit through a swivel connector. To ensure steadfast stability, secure the bracket using two 3/8” x 3” fully threaded lag bolts from the bottom into the perimeter rail. Designed for robust performance, this Marriage Wall Bracket boasts an impressive 2,400 lb. design load capacity, reinforcing your structures and bolstering their resilience against various challenges. It's available in two configurations: the bracket alone or the bracket bundled with a 5 ft. strap, offering flexibility to suit your specific project requirements.
- USD
Marriage Wall Bracket, Bracket Only
59699
Designed to facilitate precise and secure installation of vertical ties, Tie Down’s Marriage Wall Bracket is a crucial element for shear wall applications, marriage ridge beam supports, and rim plates in strict accordance with factory guidelines. Crafted to provide unwavering support, it's the ideal solution for reinforcing marriage walls or ridge beam connections, aligning perfectly with specified factory-marked column openings. This versatile bracket can be tailored to your needs, available with an optional heavier finish coating for enhanced durability. Crafted from sturdy 9-gauge painted black steel, it's engineered to withstand the demands of construction environments. Backed by a 1-year warranty, you can trust in the quality and durability of this component. Installation is streamlined and efficient, allowing for bolted attachment with a swivel to the bracket's end or through the slot, or a seamless fit through a swivel connector. To ensure steadfast stability, secure the bracket using two 3/8” x 3” fully threaded lag bolts from the bottom into the perimeter rail. Designed for robust performance, this Marriage Wall Bracket boasts an impressive 2,400 lb. design load capacity, reinforcing your structures and bolstering their resilience against various challenges. It's available in two configurations: the bracket alone or the bracket bundled with a 5 ft. strap, offering flexibility to suit your specific project requirements.
- USD
16 ft. G-60 Strap with Swivel Connectors, 30 per box
59736
Tie Down's Strap with Swivel Head Bracket Swivel Connectors introduces a versatile solution for secure and reliable connections in various construction applications. This innovative system facilitates bolted swivel attachments, enabling seamless connection between straps, beam clamps, and uplift brackets. Choose between two options: the G-60 and G-120 straps, each tailored to specific wind zones and environmental demands. G-60 straps are engineered for wind zones 1 and 2 while the G-120 straps excel in wind zone 3 and are a recommended choice for coastal regions, especially Florida. The galvanization thickness differentiates these options – G-60 boasts double the thickness of G-30, ensuring exceptional durability, while G-120 quadruples the thickness to provide unparalleled resilience against the elements, specifically in areas prone to corrosion. Whether you're working on residential, commercial, or industrial projects, Tie Down's Strap with Swivel Head Bracket Swivel Connectors offers the versatility and strength needed for dependable connections. These connectors come conveniently packaged in quantities of 30 or 50 per box, making them a practical choice for both small and large-scale endeavors.
- USD
28 in. Steel Braced Support Piers, 6000 lb. Capacity
MPP28
A reliable and efficient alternative to traditional dry-stacked blocks, our Steel Support Piers are designed and engineered to handle vertical loads with ease, providing a support rating of up to 6,000 lbs. These Support Piers are versatile in application, suitable for a wide range of factory-built structures including manufactured homes, mobile commercial units, classrooms, multiplexes, sheds, and similar structures. With the ability to withstand various wind zone conditions, except for “Exposure D” or areas within 1,500 ft. of the coastline, our Steel Support Piers are designed to provide exceptional stability and support. Available up to a maximum of 30 in. and in braced support as well, these Support Piers are compatible with a variety of heads to prevent movement after attachment to the beam or marriage line.
- USD
1 - 9 of 9
1