close
Categories
Filter By
Brand
Division
Gross Weight (lbs.)
- 0.05 1
- 0.10 1
- 0.16 1
- 0.25 1
- 0.35 1
- 0.50 1
- 0.59 1
- 0.60 1
- 0.67 2
- 0.71 1
- 0.75 3
- 0.97 1
- 1.00 5
- 1.10 1
- 1.15 1
- 1.24 1
- 1.30 1
- 1.34 2
- 1.42 3
- 1.48 2
- 1.50 1
- 1.58 3
- 1.59 1
- 1.60 1
- 1.62 2
- 1.67 2
- 1.70 2
- 1.71 1
- 1.75 2
- 1.76 1
- 1.77 1
- 1.83 1
- 1.85 1
- 1.93 2
- 1.94 1
- 10.00 1
- 10.50 1
- 11.00 1
- 11.50 1
- 12.00 2
- 12.19 1
- 12.80 1
- 13.25 1
- 18.00 1
- 19.00 1
- 2.00 2
- 2.05 1
- 2.10 2
- 2.20 1
- 2.25 1
- 2.32 1
- 2.50 1
- 2.53 1
- 2.80 2
- 22.00 1
- 3.00 1
- 3.08 1
- 3.10 1
- 3.15 1
- 3.48 1
- 3.50 2
- 3.75 1
- 3.80 1
- 3.85 1
- 3.98 1
- 37.00 1
- 4.00 1
- 4.02 1
- 4.50 2
- 4.60 1
- 4.73 1
- 5.00 2
- 5.13 1
- 5.20 1
- 5.30 1
- 5.60 1
- 5.67 1
- 5.94 1
- 56.00 1
- 6.00 1
- 6.03 1
- 6.25 1
- 6.34 1
- 6.50 7
- 7.00 4
- 7.44 1
- 7.50 2
- 7.67 1
- 7.97 1
- 8.00 2
- 8.17 1
- 8.20 1
- 8.67 1
- 8.80 1
- 9.00 2
- 9.50 1
- 9.67 1
- 90.00 1
- 95.00 1
Length (in.)
Warranty
0.25, 0.60, 1.75, 8.67, 3.50, 3.08, 4.60, 0.10 - Manufactured Housing
10 items
30 in. Coral Anchor
59096
The Coral Anchor is your solution for anchoring in coral formations. The Coral Anchor is built to be driven with ease – the 30 in. rod effortlessly penetrates the coral with the assistance of an impact hammer. The anchor's barbs ensure steadfast embedment, providing unparalleled stability and reliability. Designed for use at a 60-degree angle (30 degrees from vertical) into the coral. Not for vertical anchorage. These anchors are tested to meet the stringent requirements of HUD 3280 and 3285, and listed and labeled by RADCO #1349, ensuring compliance with industry standards and regulations.
- USD
ANGLE FRAME BRACKET
59009
Crafted from high-quality steel, Tie Down's Angle Frame Bracket serves as a pivotal connection point, ensuring a robust foundation for your structures. Designed for the attachment of longitudinal anchors to I-beams at both ends of the home, the Angle Frame Bracket is a fundamental component for anchoring security. With a 1-year warranty, Tie Down's commitment to quality is evident in the durable construction of the Angle Frame Bracket. Prioritize safety and stability by strategically determining anchor and stabilizer plate locations, along with bracket placement on the I-beam. Ensuring a strap angle of 60 degrees or lower optimizes the effectiveness of your anchoring solution. The installation process is straightforward: Drill a ½-inch hole centered in the I-beam, at least 4 inches from the edge. For wind zones II and III, connect two frame brackets with a ½-inch grade 5 bolt and nut; for wind zone I, one frame bracket is sufficient. Attach the swivel connector and strap to the angle frame brackets using ½-inch grade 5 bolts and nuts, then tighten securely.
- USD
8 ft. G-120 Strap with Swivel Connectors, 50 per box
59213
Tie Down's Universal Swivel Strap Connector empowers you to achieve secure bolted swivel or slotted clip attachments by seamlessly connecting straps to beam clamps and uplift brackets. Crafted for excellence, these connectors are made with G-120 strap material, ensuring exceptional strength and durability. Offering a comprehensive range of installation options, you have the flexibility to choose between swivel strap and I-beam bracket connections, sidewall slotted configurations, sidewall setups with nut and bolt fasteners, and longitudinal I-beam installations. Engineered to meet the demands of wind zones 2 and 3, Tie Down's Universal Swivel Strap Connector excels in challenging conditions, ensuring reliable performance in diverse construction environments. Each package includes one high-quality strap and is available in quantities of 30 or 50 per box or 8 per bundle of connectors.
- USD
SLOTTED BOLT & NUT Model #BISB
59135
Achieve unparalleled tensioning accuracy with Tie Down's Slotted Bolt and Nut, essential components for ensuring the proper tensioning of frame or sidewall straps when paired with Tension Head Anchors. Engineered exclusively for use with all Tension Head Anchors, the Slotted Bolt and Nut are meticulously designed to seamlessly integrate with these anchor systems. As indispensable components, they play a vital role in achieving optimal tensioning, guaranteeing the utmost compatibility and efficiency for your anchoring needs. The innovative slotted design of the bolt empowers you with effortless adjustment capabilities, allowing for precise fine-tuning of the tension in the straps. Whether it's tensioning frame straps or sidewall straps, the Slotted Bolt and Nut offer unparalleled versatility, adapting seamlessly to various Tension Head Anchors across diverse applications.
- USD
4 in. x 6 in. x 1 in. PADS AND PIERS ABS SHIMS/WEDGES
59663
Tie Down's ABS Shims/Wedges, measuring 4 in. x 6 in. x 1 in., are expertly crafted to deliver impeccable support and alignment in pier structures. These shims excel in filling gaps and securing piers between the pier plate and main beam, ensuring a solid and level foundation for your structure. Precision is paramount. Whether it's leveling your home or bridging gaps between the base of the main beam and the top of the pier cap, our ABS Shims/Wedges deliver the perfect solution. Installation is straightforward and hassle-free. Following the placement of an 8" x 8" x 16" concrete block atop pier footings, determine the gap size between the pier and beam. This measurement dictates the number and size of shims required (minimum of 2 inches), maintaining a clearance of less than 1 inch between pier top and beam bottom. Our shims can be double-stacked—2 inches on 2 inches or 1 inch on 2 inches—to adapt precisely to your needs. For double pier plate stacks, conveniently position two cap plates side by side. ABS Shims/Wedges must be used in pairs, ensuring a reliable and uniform support system for your pier structure. Fully approved for use by HUD 3285.312(3), attesting to their superior quality and adherence to industry standards, our ABS Shims/Wedges are thoughtfully crafted from recycled ABS materials, aligning with environmentally friendly construction choices.
- USD
Marriage Wall Bracket, Bracket Only
59699
Designed to facilitate precise and secure installation of vertical ties, Tie Down’s Marriage Wall Bracket is a crucial element for shear wall applications, marriage ridge beam supports, and rim plates in strict accordance with factory guidelines. Crafted to provide unwavering support, it's the ideal solution for reinforcing marriage walls or ridge beam connections, aligning perfectly with specified factory-marked column openings. This versatile bracket can be tailored to your needs, available with an optional heavier finish coating for enhanced durability. Crafted from sturdy 9-gauge painted black steel, it's engineered to withstand the demands of construction environments. Backed by a 1-year warranty, you can trust in the quality and durability of this component. Installation is streamlined and efficient, allowing for bolted attachment with a swivel to the bracket's end or through the slot, or a seamless fit through a swivel connector. To ensure steadfast stability, secure the bracket using two 3/8” x 3” fully threaded lag bolts from the bottom into the perimeter rail. Designed for robust performance, this Marriage Wall Bracket boasts an impressive 2,400 lb. design load capacity, reinforcing your structures and bolstering their resilience against various challenges. It's available in two configurations: the bracket alone or the bracket bundled with a 5 ft. strap, offering flexibility to suit your specific project requirements.
- USD
Xi2 Asphalt Perimeter C Beam Hardware
59618
Xi2 Asphalt System Hardware Kit for Perimeter C or CR Beam
- USD
10 in. Steel Support Piers, 6000 lb. Capacity
MPP10
A reliable and efficient alternative to traditional dry-stacked blocks, our Steel Support Piers are designed and engineered to handle vertical loads with ease, providing a support rating of up to 6,000 lbs. These Support Piers are versatile in application, suitable for a wide range of factory-built structures including manufactured homes, mobile commercial units, classrooms, multiplexes, sheds, and similar structures. With the ability to withstand various wind zone conditions, except for “Exposure D” or areas within 1,500 ft. of the coastline, our Steel Support Piers are designed to provide exceptional stability and support. Available up to a maximum of 30 in. and in braced support as well, these Support Piers are compatible with a variety of heads to prevent movement after attachment to the beam or marriage line.
- USD
30 in. Steel Braced Support Piers, 6000 lb. Capacity
MPP30
A reliable and efficient alternative to traditional dry-stacked blocks, our Steel Support Piers are designed and engineered to handle vertical loads with ease, providing a support rating of up to 6,000 lbs. These Support Piers are versatile in application, suitable for a wide range of factory-built structures including manufactured homes, mobile commercial units, classrooms, multiplexes, sheds, and similar structures. With the ability to withstand various wind zone conditions, except for “Exposure D” or areas within 1,500 ft. of the coastline, our Steel Support Piers are designed to provide exceptional stability and support. Available up to a maximum of 30 in. and in braced support as well, these Support Piers are compatible with a variety of heads to prevent movement after attachment to the beam or marriage line.
- USD