Instructions

Filter By

NOTES: A) Not for use on stainless steel fittings B) When using 1×19 strand cable, use two sleeves at each end to obtain proper holding strength. C) Lubricate bolts occasionally for easier tightening. Please follow and like us:

Minimum Tread Diameter For Pulleys or Sheaves Please follow and like us:

1. Cut cable to the required length and lace the cable through the sleeve so that the end will still protrude after crimping. 2. Properly insert sleeve into the correct cavity and line up the sleeve between the swager jaws with the long axis crosswise to the jaws… Please follow and like us:

Social Share Buttons and Icons powered by Ultimatelysocial